Products
Products
CSC940F002
VCSEL ChipCSC940F002

940nm VCSEL Array

Part number: CSC940F002

Product Description &Features

  • • Customized 940nm Vertical-Cavity Surface-Emitting Laser

  • • Very low wavelength-temperature sensitivity

  • • Chip on submount or heatsink is available upon request

  • • Other wavelengths, chip dimensions, and emitter patterns are available uponrequest

Typical Applications

  • • 3D sensing.

Electro-Optical Characteristics

Parameters

Symbol

Min

Typical

Max

Units

Test Condition

Optical Output Power

Pop

1.4

1.5

W

Pulse 2.0A, 50℃

Threshold Current

Lth

0.3

A

Pulse 50℃

Operating Current

Lop

2.0

A

Pulse 2.0A, 50℃

Differential resistance

Rs

0.35

0.50

Ω

Pulse 2.0A, 50℃

Operating Voltage

Vop

1.8

2.1

2.4

V

Pulse 2.0A, 50℃

Slope Efficiency

ηs

0.9

1

W/A

Pulse 2.0A, 50℃

Power Conversion Efficiency

PCE

35

38

%

Pulse 2.0A, 50℃

Wavelength

λpeak

934

940

946

nm

Pulse 2.0A, 50℃

Spectral Width (RMS)

Δλ

1

2.5

nm

Pulse 2.0A, 50℃

Beam Full Divergence (D86)

ϕ

17

20

23

°

Pulse 2.0A, 50℃

NF uniformity20%Pulse 2.0A, 50℃

Wavelength coefficient

dλ/dT

0.07

nm/°C

Pulse 2.0A

* All tests are under pulse condition on 1000Hz, 10%D.C. with heatsink temperature 50℃, unless otherwise specified.

Typical Performance Curves at 50°C

image.png

image.png

Mechanical Characteristics

ParameterRatingsUnits
Number of emitters391#
Emitter mini-pitch22µm
Chip Width575±20µm
Chip Length940±20µm
Chip Height100±10/
Anode ContactEmission side, Ausurfaceµm x µm
Anode bonding100X500/100X390/
Cathode ContactBackside, Au surface#

Absolute Maximum Ratings

ParameterConditionsUnits
Operating Temperature0 to 85°C
Storage Temperature-40 to 105°C

Stresses beyond the parameters listed under Absolute Maxim Ratings may cause permanent damage to the chips.

Shipping Instruction

The modules are shipped in tape & reeling packaging or Gel-boxes.


Note: No responsibility is assumed for the use of these products. The products canemit Class IV radiation and must be operated with extreme care. Avoid directly viewing the laser beam or exposure to specular reflections. Proper eyewear must be worn at all times when operating. VCSEL Chip in the modules are electrostatic-sensitive device and proper ESD protection is required forhandling.


1545213529567234.jpg